Brick Series

The main raw materials are colored inorganic mineral powders such as clay, ore, and mineral powder, with a small amount of water-based polymer as a modifier. Through molecular structure modification and recombination, low-temperature microwave molding, and finally forming a lightweight decorative material with a certain flexibility. Traditional building materials. The product has a fast production cycle and can replace traditional building materials such as tiles, paints, marbles, etc., which have high energy consumption and low environmental protection.

（1）Energy-saving and low-carbon: The production process is low-temperature microwave baking, saving energy. There is no noise, dust and other pollution during construction； （2）Safe and light weight: The brick series weighs about 1/6 of the tiles, and the applicable height can reach 100 meters, with no hidden safety hazards； （3）Bending and flexible: It has a certain flexibility, and various special-shaped buildings do not need special treatment, and can be directly pasted； （4）Durable and new: The artificial aging resistance time is 3500 hours, which is about 6 times that of the real stone paint detection standard； （5）Fireproof and flame retardant: The raw material is inorganic mineral powder, which has superior fire resistance and combustion performance reaches level A； （6）Alkali-free system: Soft stone and auxiliary materials do not add cement-based ingredients to ensure that the product is alkali-free and prevent alkali leaching； （7）Rich texture: It can show the texture of various natural materials, with clear and natural color and texture, and high aesthetics； （8）Private customization: The color, texture and size of soft stone can be customized according to the special requirements of customers.

（1）After the base layer is treated with a special interface agent, pop the horizontal and vertical positioning lines；（2）Use a small spatula to spread the prepared two-component adhesive on the back of the soft stone, and the full slurry rate should be more than 80%；（3）Paste the yang corner first and then the large surface, move and press the soft stone to adjust the seam width, and finally use a rubber board to tap it to make it bond evenly；（4）Put the two-component caulking agent into a triangular plastic bag, cut a small opening in the plastic bag and then fill the seam；（5）After the caulking agent is semi-dry, use a curved rebar head to pull out the concave seam (the rebar head is 2mm wider than the seam)；（6）Use a brush to remove the overflowing caulking agent, and wipe the soft stone clean with a semi-wet sponge.

application fields：Villas, characteristic towns, high-rise buildings, old city renovation, schools, hospitals, commercial real estate, homestays.